FCI presents circulate swap to guard from dry working

เกจวัดแรงกด swap offers an early warning alert to the potential of dry running conditions, cavitation and different pump issues that can result in emergency shutdowns and expensive maintenance.
The FLT93 Series flow change reliably screens the circulate and temperature of liquids, gases, and slurries. – Image: Fluid Components International
FCI’s FLT93 Series move change reliably displays the move and temperature of liquids, gases, and slurries. It is designed for pump wet/dry detection, where sudden, unexpected reductions in media circulate charges can depart pumps weak to over-heating circumstances that shutdown course of lines and require troubleshooting and fixing. The SIL2 rated instrument is intended for heavy-duty, potentially hazardous course of industry environments and comes with a complete listing of worldwide safety approvals.
เกจวัดแรงดันถังลม has a no transferring parts design and presents a robust scheme for pump safety with its dual alarm capability. With Alarm 1, the change detects a low flow scenario anywhere between 0.01 and 3 ft per second FPS (0.003–0.9 m per second MPS). This low move alarm is a pre-warning signal for the management system or operator who can then decide to keep the pump operating or to close it down.
If an Alarm 2 occurs as a end result of the feed line to the pump is operating dry, this would be an emergency sign to shut down the pump immediately as a end result of the bearings now see gas as a substitute of a liquid as a warmth switch media. In such conditions, the temperature of the bearings could rise very fast. Using a move change prevents permanent injury to the pump’s bearings.

Leave a Comment